 |
ISO 80369-7 무화과 C.3 축 짐에서 여성 Luer 자물쇠 연결관 Eparation 시험을 위한 여성 참고 연결관
제품 상세 정보:
| 원래 장소: | 중국 |
| 브랜드 이름: | Kingpo |
| 인증: | Certificate of ISO17025 |
| 모델 번호: | ISO 80369-7 무화과 C.3 |
결제 및 배송 조건:
| 최소 주문 수량: | 1 |
|---|---|
| 가격: | To be quoted |
| 포장 세부 사항: | 안전 판지 팩 또는 합판 상자 |
| 배달 시간: | 7 작업 일 |
| 지불 조건: | T는 / T |
| 공급 능력: | 달 당 10 pc |
|
상세 정보 |
|||
| 브랜드 이름: | Kingpo | 자료: | 경도 강철 |
|---|---|---|---|
| 표준: | ISO 80369-7 | 경도: | HRC58-62 |
| 보증: | 1 년 | 제품 이름: | LUER 계기 |
| 하이 라이트: | Iec 60061 3,계기 가지 않기 위하여 가거든 |
||
제품 설명
ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding
ISO 80369-7 FIGURE C.1 and C.3 FEMALE LUER REFERENCE CONNECTOR
ISO 80369-7:2016 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised. Because of this, ISO 594 connections must be tested per ISO 80369-7 requirements. Read: Discussion on the change.
Compatibility/Interchangeability...
Between ISO 594/2 Fig 5 and ISO 80369-7 Fig C.1
The ISO 594/2 Figure 5 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.1 Female Luer Reference Connector. The ISO 80369-7 Figure C.1 is identical to the ISO 594/2 Figure 5 Reference Fitting. ISO 80369-7 Fig C.1 and ISO 594/2 Fig 5 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 5 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.
Between ISO 594/2 Fig 6 and ISO 80369-7 Fig C.3
The ISO 594/2 Figure 6 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.3 Female Luer Reference Connector. The ISO 80369-7 Figure C.3 is identical to the ISO 594/2 Figure 6 Reference Fitting. ISO 80369-7 Fig C.3 and ISO 594/2 Fig 6 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 6 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.
General Construction Details:
Keeping with the requirements of ISO 80369-7; the Reference Connectors we sell are from hardened stainless steel. They have design details which are not specified in ISO 80369-7 and which allow connection to test equipment. These design details vary by manufacturer so be sure you understand the configuration before you order the Reference Connector. The ISO 80369 Reference Connectors are an integral part of Luer needle and syringe testing.
