제품 세부 정보

집 > 상품 >

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

상품

음성 분석기

문의하기

sale1@kingpo.hk

+86-769-81627526

지금 접촉하세요

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

MOQ:	1
가격:	To be quoted
표준 포장:	안전 상자 팩 또는 합판 상자
결제 방법:	t/t

상세 정보

제품 설명

상세 정보

원래 장소

브랜드 이름

Kingpo

모델 번호

KP-BC011

강조하다:

GB/T 18487.1-2023 EV Charging Connector Tester

GB/T 20234.1-2023 EV Charging Connector Tester

IEC 62196-1:2022 EV Charging Connector Tester

제품 설명

KP-BC011 Charging Gun Insertion/Extraction Life Tester (with solution)

Product Overview

This equipment complies with the test requirements of multiple international standards including GB/T18487.1-2023, GB/T 20234.1-2023, IEC 62196-1:2022, and IEC EN 62752-2018. It is designed for life testing and normal operation testing of disconnection capability for various types of electric vehicle charging connectors.

Equipment Functional Index Requirements

The KP-BC011 tester performs plug-in/plug-out life tests, force measurement, breaking capacity tests, and normal operation tests for charging gun bases. Key features include:

Automated immersion of samples in three different solutions (rain acid, salt water, and muddy water)
Servo motor-driven operation with PLC control system
1.5-hour power-on cycle simulation for outdoor environment testing
Computerized monitoring and data recording

Usage Environment

Parameter	Specification
Ambient Temperature	5-35℃
Ambient Humidity	85%R.H at 25℃
Atmospheric Pressure	86-106 Kpa
Environmental Conditions	Vibration-free, minimal electromagnetic interference, clean environment without corrosive substances, direct sunlight, or heat sources

Main Technical Parameters

Parameter	Specification
Drive Device	Linear module, cylinder, servo motor
Controller	15"+ industrial computer with imported PLC
Power Supply Compatibility	1.1x rated voltage, rated current (user-provided)
Test Capability	All 2p+E, 3P+E, 3P+E+N specifications; AC ≥90A or DC ≥250A; DC air cooling ≥1500V, 250A; DC liquid cooling ≥1500V, 800A
Motion Speed	0.1-0.8 m/s (adjustable to 0.8±0.1 m/s standard)
Testing Rate	≥7.5 cycles per minute (adjustable)
Insertion/Extraction Force	≥500N with digital pressure module and computer curve display
Safety Features	Earth leakage protection, overcurrent protection, overload protection, door safety protection, emergency stop switch

Panel Description

Touch screen control for parameter setting and monitoring

Directional controls for gun movement and rotation

Start/stop buttons and power switch

Emergency stop switch for immediate shutdown

USB port for peripheral connectivity

Solution tank controls for automated testing

Operation Instructions

Device Connection

Power connection: AC220V control power supply
Gas source connection: 0.4-0.6 MPa pressure required

Device Startup

Power on the device via control panel switch, then access the operating interface through the touch screen.

Parameter Setting Interface

The interface allows configuration of:

Test timing and cycle counting
Insertion/extraction stroke and force measurement
Solution soaking parameters and times
System reset functions
Alarm monitoring and display

Sample Installation

Secure gun tip in holder using fixing devices
Adjust button cylinder for proper trigger activation
Align gun mount precisely with gun tip
Finalize positioning and secure all components

Testing Procedure

The automated test sequence includes:

Immersion in rainwater acid solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in saline solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in turbid water solution (4-5 seconds) followed by drying and 10 insertion/removal cycles
1.5-hour power-on cycle
Repeat entire sequence 20 times

Note: All test parameters can be stored and retrieved for future use. The system includes comprehensive safety protections and automatic shutdown features for sample damage detection.

태그:

ISO 9360-1 신체검사 기계,

ISO 9360-1 마취 장비,

ISO 9360-1 의료 검사 장비

권장 제품

Toilet Seat Extrusion Tester with AC220V±10% Power Supply 0.5MPa Driving Air Pressure and IEC 60335-2-84 Compliance

지금 접촉하세요

1728L Capacity Corrosion Test Chamber with AC220V Power Supply and Temperature Control ±1℃ for Battery Testing Equipment

지금 접촉하세요

60825-1-2-12 고정밀 레이저 절단, 조각, 마킹용 레이저 장비

지금 접촉하세요

IEC 61010-1-2010 제6항8.3 고전압 AC/DC 검사기 또는 충동 검사기, 결합 파동 펄스 생성기

지금 접촉하세요

화면

디스플레이 에너지 효율 테스트용 8K 신호 생성기

지금 접촉하세요

50-55 Joule 에너지 범위 디피브-증명 및 에너지 감소 테스터 4.05-4.6mS 지속 시간 범위

지금 접촉하세요

임플란테블 서저 테스터 전면 패널 스위치 또는 표준에 따라 테스트 시퀀스를 수행하기 위한 옵션 컴퓨터 제어

지금 접촉하세요

제품 세부 정보

상품

배터리 시험 장비

환경 테스트 챔버

기후 시험실

온도 습도 챔버

램프 모자 계기

시험 장비

IP 시험 장비

IEC62368 시험 장비

의료 테스트 장비

화염 시험 장비

가벼운 시험 장비

플러그 소켓 시험기

전기 안전 시험 장비

케이블 시험 장비

먼지 시험 챔버

이미지 측정기

전동기 테스트 체계

음성 분석기

EV Charging Connector Tester with Compliance to GB/T 18487.1-2023 GB/T 20234.1-2023 and IEC 62196-1:2022 Standards

MOQ:	1
가격:	To be quoted
표준 포장:	안전 상자 팩 또는 합판 상자
결제 방법:	t/t

상세 정보

제품 설명

상세 정보

원래 장소

중국

브랜드 이름

Kingpo

모델 번호

KP-BC011

문서

EV Charging Connector Teste...ds.pdf

최소 주문 수량:

가격:

To be quoted

포장 세부 사항:

안전 상자 팩 또는 합판 상자

지불 조건:

t/t

강조하다

GB/T 18487.1-2023 EV Charging Connector Tester

GB/T 20234.1-2023 EV Charging Connector Tester

IEC 62196-1:2022 EV Charging Connector Tester

제품 설명

KP-BC011 Charging Gun Insertion/Extraction Life Tester (with solution)

Product Overview

Equipment Functional Index Requirements

The KP-BC011 tester performs plug-in/plug-out life tests, force measurement, breaking capacity tests, and normal operation tests for charging gun bases. Key features include:

Automated immersion of samples in three different solutions (rain acid, salt water, and muddy water)
Servo motor-driven operation with PLC control system
1.5-hour power-on cycle simulation for outdoor environment testing
Computerized monitoring and data recording

Usage Environment

Parameter	Specification
Ambient Temperature	5-35℃
Ambient Humidity	85%R.H at 25℃
Atmospheric Pressure	86-106 Kpa
Environmental Conditions	Vibration-free, minimal electromagnetic interference, clean environment without corrosive substances, direct sunlight, or heat sources

Main Technical Parameters

Parameter	Specification
Drive Device	Linear module, cylinder, servo motor
Controller	15"+ industrial computer with imported PLC
Power Supply Compatibility	1.1x rated voltage, rated current (user-provided)
Test Capability	All 2p+E, 3P+E, 3P+E+N specifications; AC ≥90A or DC ≥250A; DC air cooling ≥1500V, 250A; DC liquid cooling ≥1500V, 800A
Motion Speed	0.1-0.8 m/s (adjustable to 0.8±0.1 m/s standard)
Testing Rate	≥7.5 cycles per minute (adjustable)
Insertion/Extraction Force	≥500N with digital pressure module and computer curve display
Safety Features	Earth leakage protection, overcurrent protection, overload protection, door safety protection, emergency stop switch

Panel Description

Touch screen control for parameter setting and monitoring

Directional controls for gun movement and rotation

Start/stop buttons and power switch

Emergency stop switch for immediate shutdown

USB port for peripheral connectivity

Solution tank controls for automated testing

Operation Instructions

Device Connection

Power connection: AC220V control power supply
Gas source connection: 0.4-0.6 MPa pressure required

Device Startup

Power on the device via control panel switch, then access the operating interface through the touch screen.

Parameter Setting Interface

The interface allows configuration of:

Test timing and cycle counting
Insertion/extraction stroke and force measurement
Solution soaking parameters and times
System reset functions
Alarm monitoring and display

Sample Installation

Secure gun tip in holder using fixing devices
Adjust button cylinder for proper trigger activation
Align gun mount precisely with gun tip
Finalize positioning and secure all components

Testing Procedure

The automated test sequence includes:

Immersion in rainwater acid solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in saline solution (4-5 seconds) followed by 10 insertion/removal cycles
Immersion in turbid water solution (4-5 seconds) followed by drying and 10 insertion/removal cycles
1.5-hour power-on cycle
Repeat entire sequence 20 times

Note: All test parameters can be stored and retrieved for future use. The system includes comprehensive safety protections and automatic shutdown features for sample damage detection.

태그: